How to set it in the instrument
These pictures show you how to set the pick-up into the soundboard and brace or backpost.
(thesimple model for your clearer views on the operation)
|
Click to enlarge
|
|
First of all, measure the space between soundboard and brace/backpost to select the base part with most suitable thickness. The yellow "base select gauge" will indicate the best fit base when you insert it between the sound board and brace or backpost.
|
|
Click to enlarge
|
|
As shown in the left picture, the base select gauge will find the suitable No. of the base.
In the left case, the gauge stops in No.2, the base with printed "No.2" will fit the instrument.
|
|
Click to enlarge
|
|
Then put the sensor into the selected base, screwing it into the hole of the base until the bottom part of the sensor touches on the surface of the base.
Caution!) Do it carefully, otherwise you might break the screw.
|
|
Click to enlarge
|
|
And Contact tip is installed.
Now you are ready to go to the next step.
|
|
