This microphone system is the one improved to be suitable for the flute based on ATM35 of the Audio Technica Ltd..
Please handle according to the manual of ATM35 of the Audio Technica Ltd..
Adjusts so that the microphone may become the position of the favor by installing the clip in the tube connection part of the flute.
|
Click to enlarge
|
Click to enlarge
|
|
The mike cable is connected with the power module.
The cable for the signal sending off is connected with the XLR connector of the power module.
Phantom Power is recommended to be used, and it is possible to use also with 9V battery when there is no Phantom Power.
High dynamic range and high sound quality can be expected if uses with Phantom Power.
About the tone
The roll-off circuit of the power module is improved to a suitable one for the flute.
To decrease the low frequency noise generated when key of the flute was operated, this roll-off circuit was designed.
This roll-off circuit decreases the effect that the low frequency is emphasized when the microphone is brought close to the flute.
Please set the switch of the power module at the roll-off position when you use this roll-off circuit.
|
